Enhancing Broadband
| All Products | Modems | Routers | Business | Wireless | Forum | News | Contact Us |
 |
 |
 |
 |
All Products Modems Routers ST PRO ST PRO Firewall ST 510r3 ST 510v4 ST 530 Business Wireless Forum News Press Contact Us |
 |
 |
 |
 |
Enabling PING reply on a ST510v4 / ST530 / ST610 via Telnet
If you wish enable external ping-replies on your SpeedTouch Router, it can be achieved by changing the ping rule in the PPP connection from "my net" to "everyone". You will also need to create two new rules in the firewall or turn the firewall off.
These instructions are for enabling external ping-replies via a telnet session in command prompt, and are based on having a 10.0.0.138 address on the router.
Instructions:1. Open Command Prompt
2. Type in telnet 10.0.0.138
5. Go to Firewall
6. Go to Rule
7. Go to Create
8. Enter the information
- Chain - sink
- Index - 0 (zero)
- prot - icmp
- action - accept
9. Go to OK
10. Go to Create
11.Enter the information
- Chain - source
- Index - 0 (zero)
- prot - icmp
- action - accept
12. Go to OK
13. Back to the main menu by pressing enter when '..' is highlighted.
14. Go to PPP
15. Go to ifdetach
16. Enter pppoa and go OK
17. Go to rtdelete
18. Enter pppoa and go OK
19. Go to rtadd
20. Enter the following information
- intf - pppoa
- dst - 0 (zero)
- dstmsk - 0 (zero)
- src - 10.0.0.0 (or internal IP address of LAN)
- srcmsk - 0 (zero)
- metric - 0 (zero)
21. Go OK
22. Go to ifattach
23. Enter pppoa and go OK
24. Back to the main menu by pressing enter when '..' is highlighted.
25. Go to Cancel
26. This should take you back to the original telnet prompt =>
27. In the => prompt type saveall
28. Type exit
29. External Pings should now be enabled.