Enhancing Broadband
| All Products | Modems | Routers | Business | Wireless | Forum | News | Contact Us |
 |
 |
 |
 |
All Products Modems Routers ST PRO ST PRO Firewall ST 510r3 ST 510v4 ST 530 Business Wireless Forum News Press Contact Us |
 |
 |
 |
 |
If you require to access your SpeedTouch Router but cannot remember your security username/password, or need to erase a configuration you may need to perform a hardware reset.
The necessary instructions in HTML follow:
| 1 | Make sure the SpeedTouch is powered off. |
| 2 | Put dip switch #4 on the back of the router into the up position. |
| 3 | Turn the router on. |
| 4 | Wait for 1 minute. |
| 5 | Place dip switch #4 back to the down position. |
| 6 | The SpeedTouch will now be in its factory default settings. Resetting the system to its factory defaults also involves deleting the configuration profile settings. You will need to reconfigure the system using the SpeedTouch Setup wizard (510 / 610) or by re-entering you ISP info in the PPP configuration page (PRO). |
Note: We take no responsibility for any damages / information loss that may be done in the process of a Hardware Reset.